Ensystex.com.au
TRITHOR High Tack Adhesive
TRITHOR High Tack is a high initial strength, permanent tack, low odour adhesive designed for use with plastic termite sheet products to ensure high bond strength. Fully tested and proven in Australia, TRITHOR High Tack provides superior adhesion and coverage. TRITHOR High Tack adhesive is considered termite-resistant in accord with the requirement of AS 3660.1 for use with chemically treated termite sheets, that are not fully and permanently compressed between other building components. TRITHOR High Tack is supplied in a 500 mL aerosol can and will cover up to 7 m2 of surface.
ADVANTAGES
• Very fast drying
• Long lasting high tack (pressure sensitive)
• Moisture and weather-resistant bond
• Good heat resistance (up to 68° C)
• Full strength achieved in 24 hours
• No chlorinated solvents
• Will not attack polystyrene
• No ozone depleting substances
Apply adhesive to one or both surfaces to be mated, at 80% to 100% coverage.
Spraying both surfaces will result in a stronger, more permanent bond.
Shake can well before using. Ensure plastic, masonry and concrete surfaces are clean and dry before use. Hold can 100 mm from surface to be bonded. Lightly spray both surfaces to be bonded. Allow adhesive to dry for 1 – 2 minutes or until dry to touch. Firmly press the two surfaces together.
Use acetone to remove adhesive and clean 6-way adjustable spray nozzle if required.
